ul. Bytomska 122
41-940 Piekary Śląskie
tel. +48 32 307 02 77
Used for continuous mixing of dry mineral mixtures (of special destination) with water, pumping and transportation by hose to certain distances and putting on the wet mixture by special nozzle onto the prepared surfaces.
The device can be used only for dry mixtures of special purposes, if the producer’s data sheet explicitly indicates the mixture can be applied into the process of wet method of torkreting or spraying.
|Max. working pressure||up to 30 bar (3,0 MPa)|
|Max. output||up to 90 dm3/min.|
|Horizontal pumping||up to 40 ÷ 60 m|
|Grain particles||max 4 ÷ 6 mm|
|Suggested pump rotational speed||180 ÷ 300 rpm|
|Drive:||hydraulic, absorbency 160 cm3/rev.|
|Supply||hydraulic oil HLP 46 or HLP 68|
|Hydraulic oil required filtration||16 µm|
|Required oil pressure||140 ÷ 160 bar (14-16MPa)|
|Horizontal deviation||longitudinal and transversal +/- 5°|
|Cooling||air-cooling by convection|
|Absorbency||50 – 90 dm3/min.|
|Water mains supply||socket stecko 25 or other according to the order|
|Max water pressure||25 bar (2,5 MPa)|
|Oil supply||M26x1,5 DKOL acc to DIN, with adapters or other according to the order|
|Pressure connection (outlet)||female socket cam-lock mortar DN50 or DN40|
|Mixing basket capacity||cca 75dm3|
|Dimensions (length x width x height)||1900 x 800 x 1000 mm|
It is possible to manufacture the device with explosion-proof mark Ex I M2 c X or without it.